What are my options for using PCoIP between trusted and untrusted networks?
PCoIP is encrypted by default and it cannot be disabled. This makes PCoIP itself secure on untrusted networks. To get PCoIP traffic from untrusted networks to PCoIP Hosts the following options can be used: Over a VPN that is UDP compatible. An SSL VPN …
Knowledge Base Article Advisory Security Performance HP Anyware
Last modified: September 3, 2023
715
Encryption and bandwidth metrics used for various setups PCoIP Devices and VMware Horizon View
Answer:   Encryption and Bandwidth Metrics   Tera1 Zero Client Tera2 Zero Client Windows View Client Host Card No View Security Server Up to 220 Mbps AES-128 (not encapsulated) Up to 500 Mbps AES-128/AES-256| (not encapsulated/encapsulated) FW 4.1.0 and …
Knowledge Base Article Advisory Performance Third Party Enhancements Remote Workstation Card Zero Clients
Last modified: September 3, 2023
626
What network switch or router queue size should be used?
Network device queues, also known as network buffer's, should be configured to accommodate 50ms to 100ms of PCoIP protocol traffic in total. This assumes that one network device (e.g. switch or router) is congested for a given network path. If the network …
Knowledge Base Article Advisory Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: September 19, 2023
623
What is the impact of minimum and maximum initial image quality on a PCoIP Session?
Minimum and maximum initial image quality sets the lower and upper quality level. The default values in HP Anyware is Q40 for the minimum initial image quality and Q80 for the maximum initial image quality. If PCoIP estimates there is adequate bandwidth …
Knowledge Base Article Advisory Display Performance Remote Workstation Card HP Anyware
Last modified: July 31, 2023
610
Should I use an initial image quality of Q100?
An initial image quality of Q100 will deliver the highest quality of image PCoIP can deliver. Q100 is not lossless, for a lossless image, build to lossless must be enabled.  How to configure the Turn off Build-to-Lossless feature session variable in GPO …
Knowledge Base Article Advisory Display Performance Remote Workstation Card Zero Clients HP Anyware
Last modified: August 1, 2023
595
Can a WAN accelerator be used to improve the performance of PCoIP sessions?
PCoIP does not benefit from a WAN accelerator, legacy WAN accelerator solutions use different methods to improve the performance of applications operating over congested networks. These methods include compressing packets, implementing proxy servers that …
Knowledge Base Article Advisory Performance HP Anyware Remote Workstation Card
Last modified: December 14, 2022
422
Which PCoIP Zero Clients are VMware Ready certified?
For a list of VMware Ready certified PCoIP Zero Clients see VMware View HCL .  Note: PCoIP Zero Clients can be identified by ThreadX in the OS Version column.  For a complete list of PCoIP Zero Clients, see the HP web site . … Which PCoIP Zero Clients are …
Knowledge Base Article Advisory Setup Third Party Enhancements Zero Clients
Last modified: September 3, 2023
407
Should I configure "Maximum Initial Image Quality" to 100 if I want lossless still image?
No. Regardless of PCoIP image-quality settings, still images are always lossless. The time it takes to display them depends on your image-quality settings and available network bandwidth. For most situations, it is recommended to use 40 for Minimum Image …
Knowledge Base Article Advisory Performance Display Remote Workstation Card HP Anyware Zero Clients
Last modified: December 9, 2022
366
Will out of order packets impact a PCoIP session?
PCoIP will work when packets are becoming out of order between the two PCoIP endpoints. Re-ordering packets on PCoIP endpoints requires that packets are held in a queue/buffer while waiting to receive the packets that need to be put back into order.  With …
Knowledge Base Article Advisory Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: December 9, 2022
314