What is the DHCP request timeout on a PCoIP Zero Client or PCoIP Remote Workstation Card?
The PCoIP Zero Client and PCoIP Remote Workstation Card will attempt to get a DHCP lease 4 times after power on or after the network link comes up. When a PCoIP device is connected to a network with no DHCP server and the DHCP request time-out period …
Can I replace the PCoIP Management Console's Self-Signed SSL certificate with a certificate signed by a Certificate Authority?
PCoIP Management Console  PCoIP Management Console supports replacement of the default HP Anyware self signed certificate. It is recommended that this certificate be replaced by a certificated signed by a trusted Certificate Authority. For instructions on …
What are my options for using PCoIP between trusted and untrusted networks?
PCoIP is encrypted by default and it cannot be disabled. This makes PCoIP itself secure on untrusted networks. To get PCoIP traffic from untrusted networks to PCoIP Hosts the following options can be used: Over a VPN that is UDP compatible. An SSL VPN …
What network switch or router queue size should be used?
Network device queues, also known as network buffer's, should be configured to accommodate 50ms to 100ms of PCoIP protocol traffic in total. This assumes that one network device (e.g. switch or router) is congested for a given network path. If the network …
Encryption and bandwidth metrics used for various setups PCoIP Devices and VMware Horizon View
Answer:   Encryption and Bandwidth Metrics   Tera1 Zero Client Tera2 Zero Client Windows View Client Host Card No View Security Server Up to 220 Mbps AES-128 (not encapsulated) Up to 500 Mbps AES-128/AES-256| (not encapsulated/encapsulated) FW 4.1.0 and …
What is the impact of minimum and maximum initial image quality on a PCoIP Session?
Minimum and maximum initial image quality sets the lower and upper quality level. The default values in HP Anyware is Q40 for the minimum initial image quality and Q80 for the maximum initial image quality. If PCoIP estimates there is adequate bandwidth …
Do PCoIP Zero Clients check for certificate revocation of the server SSL certificate when starting a PCoIP session?
The following points briefly describe the PCoIP Zero Client Online Certificate Status Protocol (OCSP) functionality when connecting to a VMware View Connection Server, PCoIP Connection Manager, HP Anyware PCoIP Agent or HP Anyware Connector. PCoIP Zero …
Should I use an initial image quality of Q100?
An initial image quality of Q100 will deliver the highest quality of image PCoIP can deliver. Q100 is not lossless, for a lossless image, build to lossless must be enabled.  How to configure the Turn off Build-to-Lossless feature session variable in GPO …
Security notice (CVE-2020-0601): Windows vulnerability affecting PCoIP Agents and PCoIP Clients
Summary A vulnerability in the Microsoft Windows CryptoAPI (CVE-2020-0601) fails to properly validate certificates that use Elliptic Curve Cryptography (ECC). This may allow an attacker to spoof the validity of certificate chains used to secure a PCoIP …