Teradici Documentation and Downloads | Documents and Downloads for Teradici products

Sort by

What is an acceptable level of packet loss?

Just like VoIP and video conferencing, PCoIP is a real time protocol. Once a packet is lost in transit, there typically isn't time to re transmit before the PCoIP session is impacted. Therefore, the most acceptable level of loss is 0%. Packet loss maybe …

What is "perceptually lossless"?

Whenever an image that is sent to a remote client is not pixel exact, it is considered lossy rather than lossless. The human eye is not always able to perceive these lossy differences. For example, the human eye is much less sensitive to errors in the …

Is a 2560x1600 display resolution supported by PCoIP hardware devices?

PCoIP Zero Clients and PCoIP Remote Workstation Cards (host cards) support 2560x1600 based on the following: Firmware 4.0.3 and newer TERA2140 Supports a maximum resolution for two monitors of 2560x1600 @60Hz Supports a maximum resolution for four …

What is monitor emulation on the PCoIP Remote Workstation Card and how does it work?

Answer: Monitor emulation is a feature on the PCoIP Remote Workstation Card (also known as a host card) that ensures graphics cards see a valid EDID on a Display Port or DVI port on boot. This helps prevent the graphics card from driving DVI signals or DP …

Do PCoIP Zero Clients support single and multi-touch monitors?

Answer: PCoIP Zero Clients support selected ELO touch monitors in pre-session (using the Teradici OSD) since Firmware 3.4.0,and should support other touchscreen monitors (single and multi-touch) while in a PCoIP session. To make a connection using a …

Knowledge Base Article Advisory Display Zero Clients

Last modified: September 21, 2023

1480

How much latency does PCoIP technology add to the remote system?

The latency added by PCoIP technology to a remote system is related to the time to encode (compression) and decode (decompression) for the PCoIP protocol, which depends on the implementation. Total end-to-end latency is determined by OS latency and …

Why is the BIOS not accessible from my PCoIP Workstation solution?

The BIOS must be able to enumerate the PCIe PCoIP Remote Workstation Card and support OHCI which typically does not occur until post BIOS. USB peripherals (keyboard, mouse etc.) connected to PCIe PCoIP Remote Workstation Cards as in a PCoIP Workstation …

Why does HP Anyware specify a Nvidia and AMD driver for use with the PCoIP Graphics Agent?

HP Anyware performs extensive testing of the PCoIP Graphics Agent for Windows and the PCoIP Graphics Agent for Linux before release. As part of the tests, HP Anyware uses the latest Nvidia and AMD drivers available at the time. Upon release of the PCoIP …

Knowledge Base Article Advisory Display HP Anyware

Last modified: September 27, 2023

1071

How to tune PCoIP for bandwidth constrained Network?

Bandwidth Tuning To determine if bandwidth tuning is required, setup a PCoIP session and monitor the performance of your system. The values to record are latency, latency variation, packet loss and tx and rx statistics. For details on how to run these …

How much bandwidth does PCoIP require?

The simple answer is 'it depends'. The amount of bandwidth required depends on a number of factors (display resolution, frame rate, graphical intensity for the user, importance of image quality, amount of display interactivity vs static viewing). Due to …

Filter by Products

Filter by Topics

Search Knowledge Center

Filter by Products

Filter by Topics