HP Anyware Standard & Graphic agents (21.03, 21.01. 20.10) are unable to install due to powershell execution popup
Issue: Users are unable to install a new instances for HP Anyware Standard or HP Anyware Graphics agent for Windows when using one of the following loads identified in the table below: HP Anyware (Windows Version) Versions Impacted To fix, upgrade to the …
Knowledge Base Article Advisory Setup HP Anyware
Last modified: July 28, 2023
1023
Why does touchscreen calibration not work with a resolution other then native resolution?
Answer: Calibration for touchscreens via Teradici PCoIP firmware is designed to work from the OSD in native resolution with elo branded touch screens. To calibrate from a different resolution other than native, the elo device must be bridged and the elo …
Knowledge Base Article Advisory Display Zero Clients
Last modified: September 21, 2023
1001
How do I choose between remote workstation solutions?
To decide on the most suitable remote workstation solution for your needs, you will need to understand the available options. Remote workstation solutions: Dedicated remote workstation using PCoIP Remote Workstation Cards and PCoIP Zero Clients. See a …
Knowledge Base Article Advisory Performance Setup HP Anyware Remote Workstation Card
Last modified: September 20, 2023
884
Can I connect a local monitor to computer that has PCoIP Remote Workstation Card or HP Anyware Installed?
Although you may have enough display heads on your GPU to connect local monitors, it is not a supported configuration when using a PCoIP Remote Workstation Card or HP Anyware. Connecting an additional local monitor may cause the following issues: Blank …
Knowledge Base Article Advisory Display HP Anyware Remote Workstation Card
Last modified: July 31, 2023
851
What SFP modules have HP Anyware tested with the PCoIP Zero Client and PCoIP Remote Workstation Card?
Warning:  This is not a comprehensive list and contains modules that have been tested and/or deployed successfully in client environments. Since SPF modules are built by different manufacturers which may implement different engineering designs, it is …
Knowledge Base Article Advisory Setup Zero Clients
Last modified: September 14, 2023
854
What PCoIP GPO settings in VMware Horizon View take effect immediately after the change is made?
Answer: There are currently 4 GPO settings which changes take effect immediately. These are available in Horizon View 5.2 and are listed below along with links to the individual GPO descriptions. In Horizon View 5.3 an additional GPO was added to this …
Knowledge Base Article Advisory Setup Performance Third Party Enhancements Zero Clients
Last modified: September 3, 2023
794
Do PCoIP Zero Clients and PCoIP Remote Workstation Cards support HDMI connections?
PCoIP zero clients only come with the following connections: sVGA DVI (single and dual link) Display Port (1.1a) HDMI is not a supported connector type on PCoIP Zero Clients. You can purchase Display Port or DVI to HDMI cables and adapters however you may …
Knowledge Base Article Advisory Display Setup Remote Workstation Card Zero Clients
Last modified: July 31, 2023
706
What is the impact of minimum and maximum initial image quality on a PCoIP Session?
Minimum and maximum initial image quality sets the lower and upper quality level. The default values in HP Anyware is Q40 for the minimum initial image quality and Q80 for the maximum initial image quality. If PCoIP estimates there is adequate bandwidth …
Knowledge Base Article Advisory Display Performance Remote Workstation Card HP Anyware
Last modified: July 31, 2023
610
Should I use an initial image quality of Q100?
An initial image quality of Q100 will deliver the highest quality of image PCoIP can deliver. Q100 is not lossless, for a lossless image, build to lossless must be enabled.  How to configure the Turn off Build-to-Lossless feature session variable in GPO …
Knowledge Base Article Advisory Display Performance Remote Workstation Card Zero Clients HP Anyware
Last modified: August 1, 2023
596