Teradici Documentation and Downloads | Documents and Downloads for Teradici products

Sort by

What is monitor emulation on the PCoIP Remote Workstation Card and how does it work?

Answer: Monitor emulation is a feature on the PCoIP Remote Workstation Card (also known as a host card) that ensures graphics cards see a valid EDID on a Display Port or DVI port on boot. This helps prevent the graphics card from driving DVI signals or DP …

How to change the Num Lock setting on a PCoIP Zero Client

The num lock ( numlock) setting depends on whether the PCoIP Zero Client is at the On-Screen-Display (OSD) or when in-session. On-Screen-Display operation The "Factory" default setting of num lock can be set by the PCoIP Zero Client OEM during …

Do PCoIP Zero Clients support single and multi-touch monitors?

Answer: PCoIP Zero Clients support selected ELO touch monitors in pre-session (using the Teradici OSD) since Firmware 3.4.0,and should support other touchscreen monitors (single and multi-touch) while in a PCoIP session. To make a connection using a …

Knowledge Base Article Advisory Display Zero Clients

Last modified: September 21, 2023

1480

What are PCoIP session variables for HP Anyware in Windows OS?

Answer: PCoIP Software Session Variables in Windows let you tune and configure a PCoIP session. Run gpedit.msc from a Windows Start -> Search menu. This will bring up the Local Computer Policy window. Navigate to " Computer Configuration -> …

Knowledge Base Article Advisory Session HP Anyware

Last modified: September 12, 2023

1386

Why is the BIOS not accessible from my PCoIP Workstation solution?

The BIOS must be able to enumerate the PCIe PCoIP Remote Workstation Card and support OHCI which typically does not occur until post BIOS. USB peripherals (keyboard, mouse etc.) connected to PCIe PCoIP Remote Workstation Cards as in a PCoIP Workstation …

Why does HP Anyware specify a Nvidia and AMD driver for use with the PCoIP Graphics Agent?

HP Anyware performs extensive testing of the PCoIP Graphics Agent for Windows and the PCoIP Graphics Agent for Linux before release. As part of the tests, HP Anyware uses the latest Nvidia and AMD drivers available at the time. Upon release of the PCoIP …

Knowledge Base Article Advisory Display HP Anyware

Last modified: September 27, 2023

1070

Why does touchscreen calibration not work with a resolution other then native resolution?

Answer: Calibration for touchscreens via Teradici PCoIP firmware is designed to work from the OSD in native resolution with elo branded touch screens. To calibrate from a different resolution other than native, the elo device must be bridged and the elo …

Knowledge Base Article Advisory Display Zero Clients

Last modified: September 21, 2023

1001

What does the error message "Session Closed Remotely" mean?

There are a number or reasons that the message "Session Closed Remotely" appears during a brokered session listed below. Informational Messages Closed by login at an alternate location or host shutdown/restart User initiated logout Disconnected by …

Can I connect a local monitor to computer that has PCoIP Remote Workstation Card or HP Anyware Installed?

Although you may have enough display heads on your GPU to connect local monitors, it is not a supported configuration when using a PCoIP Remote Workstation Card or HP Anyware. Connecting an additional local monitor may cause the following issues: Blank …

Do PCoIP Zero Clients and PCoIP Remote Workstation Cards support HDMI connections?

PCoIP zero clients only come with the following connections: sVGA DVI (single and dual link) Display Port (1.1a) HDMI is not a supported connector type on PCoIP Zero Clients. You can purchase Display Port or DVI to HDMI cables and adapters however you may …

Filter by Products

Filter by Topics

Search Knowledge Center

Filter by Products

Filter by Topics