What are my options for using PCoIP between trusted and untrusted networks?
PCoIP is encrypted by default and it cannot be disabled. This makes PCoIP itself secure on untrusted networks. To get PCoIP traffic from untrusted networks to PCoIP Hosts the following options can be used: Over a VPN that is UDP compatible. An SSL VPN …
Knowledge Base Article Advisory Security Performance HP Anyware
Last modified: September 3, 2023
716
What network switch or router queue size should be used?
Network device queues, also known as network buffer's, should be configured to accommodate 50ms to 100ms of PCoIP protocol traffic in total. This assumes that one network device (e.g. switch or router) is congested for a given network path. If the network …
Knowledge Base Article Advisory Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: September 19, 2023
630
What is the impact of minimum and maximum initial image quality on a PCoIP Session?
Minimum and maximum initial image quality sets the lower and upper quality level. The default values in HP Anyware is Q40 for the minimum initial image quality and Q80 for the maximum initial image quality. If PCoIP estimates there is adequate bandwidth …
Knowledge Base Article Advisory Display Performance Remote Workstation Card HP Anyware
Last modified: July 31, 2023
610
Should I use an initial image quality of Q100?
An initial image quality of Q100 will deliver the highest quality of image PCoIP can deliver. Q100 is not lossless, for a lossless image, build to lossless must be enabled.  How to configure the Turn off Build-to-Lossless feature session variable in GPO …
Knowledge Base Article Advisory Display Performance Remote Workstation Card Zero Clients HP Anyware
Last modified: August 1, 2023
596
Security notice (CVE-2020-0601): Windows vulnerability affecting PCoIP Agents and PCoIP Clients
Summary A vulnerability in the Microsoft Windows CryptoAPI (CVE-2020-0601) fails to properly validate certificates that use Elliptic Curve Cryptography (ECC). This may allow an attacker to spoof the validity of certificate chains used to secure a PCoIP …
Knowledge Base Article Advisory Security HP Anyware
Last modified: August 2, 2023
494
What is the PCoIP Transport Header?
Answer: The PCoIP Transport Header is an unencrypted application layer header for PCoIP protocol to allow network devices to make intelligent prioritization and QoS decisions for packets in a PCoIP session to improve the user experience.  The PCoIP …
Knowledge Base Article Advisory HP Anyware
Last modified: September 8, 2023
445