Workaround for database failures when restoring or migrating from PCoIP Management Console 2.4 or older to versions 2.5.1 or newer.
Customers on Management Console (MC) 2.4 or older, restoring databases, or migrating to 2.5.1 or newer are required to run this mandatory database clean-up script prior to the restore or migration. These steps reduce the size of the database which is …
Knowledge Base Article Advisory Management Setup Management Console
Last modified: September 3, 2023
2482
Why does HP Anyware specify a Nvidia and AMD driver for use with the PCoIP Graphics Agent?
HP Anyware performs extensive testing of the PCoIP Graphics Agent for Windows and the PCoIP Graphics Agent for Linux before release. As part of the tests, HP Anyware uses the latest Nvidia and AMD drivers available at the time. Upon release of the PCoIP …
Knowledge Base Article Advisory Display HP Anyware
Last modified: September 27, 2023
1086
Can I connect a local monitor to computer that has PCoIP Remote Workstation Card or HP Anyware Installed?
Although you may have enough display heads on your GPU to connect local monitors, it is not a supported configuration when using a PCoIP Remote Workstation Card or HP Anyware. Connecting an additional local monitor may cause the following issues: Blank …
Knowledge Base Article Advisory Display HP Anyware Remote Workstation Card
Last modified: July 31, 2023
858
Can I use both DHCP options and DNS SRV records for device discovery in the PCoIP Management Console at the same time?
Answer: No . Note: It is recommended to user either DHCP Options or DNS Records when configuring auto-discovery for the PCoIP Management Console. To determine which to use you need to understand your environment. For example if you are only going to have …
Knowledge Base Article Advisory Management Management Console
Last modified: September 7, 2023
675
What is the impact of minimum and maximum initial image quality on a PCoIP Session?
Minimum and maximum initial image quality sets the lower and upper quality level. The default values in HP Anyware is Q40 for the minimum initial image quality and Q80 for the maximum initial image quality. If PCoIP estimates there is adequate bandwidth …
Knowledge Base Article Advisory Display Performance Remote Workstation Card HP Anyware
Last modified: July 31, 2023
624
Should I use an initial image quality of Q100?
An initial image quality of Q100 will deliver the highest quality of image PCoIP can deliver. Q100 is not lossless, for a lossless image, build to lossless must be enabled.  How to configure the Turn off Build-to-Lossless feature session variable in GPO …
Knowledge Base Article Advisory Display Performance Remote Workstation Card Zero Clients HP Anyware
Last modified: August 1, 2023
602
Should I configure "Maximum Initial Image Quality" to 100 if I want lossless still image?
No. Regardless of PCoIP image-quality settings, still images are always lossless. The time it takes to display them depends on your image-quality settings and available network bandwidth. For most situations, it is recommended to use 40 for Minimum Image …
Knowledge Base Article Advisory Performance Display Remote Workstation Card HP Anyware Zero Clients
Last modified: December 9, 2022
377