Can I connect a local monitor to computer that has PCoIP Remote Workstation Card or HP Anyware Installed?
Although you may have enough display heads on your GPU to connect local monitors, it is not a supported configuration when using a PCoIP Remote Workstation Card or HP Anyware. Connecting an additional local monitor may cause the following issues: Blank …
How to change the Active Directory (AD) password when using Imprivata OneSign.
Scenario 1: A user's password is reset via the AD by the administrator. When the user taps the proximity card to login via OneSign, the PCoIP Zero Client shows the message that the credentials are invalid. Scenario 2: When a user taps the proximity card …
What PCoIP GPO settings in VMware Horizon View take effect immediately after the change is made?
Answer: There are currently 4 GPO settings which changes take effect immediately. These are available in Horizon View 5.2 and are listed below along with links to the individual GPO descriptions. In Horizon View 5.3 an additional GPO was added to this …
Failed to install Virtual USB Hub: -500. Removing the HP Anyware PCoIP Agent for Windows Vhub component
Problem When installing the new agent you get the error at the top, "Installation Aborted. Setup was not completed successfully. The on screen install log contains the message "Failed to install Virtual USB Hub: -500".   Cause The HP Anyware USB Virtual …
FAQ - Webcams Peripherals Device
How to troubleshoot Webcams Causes: Webcam will not work if  the webcam that you are using does not support USB 1.1. the webcam is connected to a USB 2.0 port internal/external USB hub and will present you error "USB device not supported behind a …
Why does my screen jitter or stutter, and scroll bars appear on the PCoIP Software client window after connecting to a PCoIP Remote Workstation Card?
Answer: This occurs when a software client is being used on a laptop with the display configured to operate in non-native mode. The EDID information found in some laptops only include timing information for the native display resolution. If a non-native …
Do PCoIP Zero Clients and PCoIP Remote Workstation Cards support HDMI connections?
PCoIP zero clients only come with the following connections: sVGA DVI (single and dual link) Display Port (1.1a) HDMI is not a supported connector type on PCoIP Zero Clients. You can purchase Display Port or DVI to HDMI cables and adapters however you may …
Why does the dual-link DVI monitor connected to my PCoIP Zero Client not display properly?
Check your DVI cable, it may not be dual-link capable. Dual-link cable ends have all of the pins populated whereas single-link cables are missing 6 pins. These pins carry the extra information to allow up to 2560 x 1600 resolution. Some monitors will …
Upgrading from firmware 3.4.x or earlier, a message displays indicating my USB devices failed authorization
Problem When upgrading PCoIP Zero Client firmware from 3.4.x, USB locally terminated devices work, but no redirected (bridged) USB devices work. When viewing attached devices in the Administrator Web Interface (AWI) only the mouse and keyboard show as …