Mirroring displays on PCoIP Zero Clients
Requirements Tera2 dual port client (TERA2321) Firmware 4.1 or newer   Instructions From the PCoIP Zero Client's onscreen display (OSD) or both versions of the Management Console OSD - browse to Options > Configuration > Display > Enable Display Cloning …
Knowledge Base Article Tutorial Display Zero Clients
Last modified: November 7, 2022
1255
Client Performance Health Check - Diagnostics and troubleshooting guide
Summary To receive a detailed client diagnostic report, create a client support/log file bundle  and then submit this bundle to the PCoIP  health check   tool.  Once the files are submitted, it will take 5-10 minutes to produce a detailed report.  The …
Knowledge Base Article Diagnostics Performance HP Anyware
Last modified: September 3, 2023
1197
Displays
After completing this unit, you’ll be able to: Understand the different display configurations. Understand the supported resolutions 20 mins With PCoIP, you can configure several display settings as described below.   Display Resolutions PCoIP supports …
Knowledge Base Article Tutorial Display HP Anyware
Last modified: September 5, 2023
1191
Why do I hear pops and crackles or dead air in my PCoIP session when connecting with a PCoIP Zero Client?
This article refers to the audio playback using the PCoIP Analog Audio Data Channel from a host machine to a PCoIP Zero Client. It does not apply to microphone input from a PCoIP Zero Client to a VM.   Problem The PCoIP Zero Client must have either an …
Knowledge Base Article Troubleshooting Performance Zero Clients
Last modified: December 20, 2023
1189
When connecting to the PCoIP Graphics Agent I only get 1 display when I have 2 or more connected
Problem When connecting to a PCoIP Graphics Agent installed on a machine with an Nvidia GRID K340, Nvidia GRID K520, Nvidia GRID M series or above GPU I only get one display but the PCoIP Zero Client or PCoIP Software Client has multiple displays …
Knowledge Base Article Troubleshooting Display HP Anyware
Last modified: November 16, 2022
1108
Why does HP Anyware specify a Nvidia and AMD driver for use with the PCoIP Graphics Agent?
HP Anyware performs extensive testing of the PCoIP Graphics Agent for Windows and the PCoIP Graphics Agent for Linux before release. As part of the tests, HP Anyware uses the latest Nvidia and AMD drivers available at the time. Upon release of the PCoIP …
Knowledge Base Article Advisory Display HP Anyware
Last modified: September 27, 2023
1101
Why can I not see the mouse cursor when using PCoIP HP Anyware installed on Windows 8.1 or Windows 10 bare metal?
Problem When using PCoIP HP Anyware to connect to Windows 10 running on bare metal (operating system installed directly on the computer with no virtualization), the cursor is not visible.   Cause When Windows 10 do not detect a locally attached mouse, …
Knowledge Base Article Troubleshooting Display HP Anyware
Last modified: September 21, 2023
1043