Why is the network connection lost when a USB disk is plugged into a PCoIP Zero Client?
Scenario A desktop freeze, session disconnect or "network connection lost" (if the overlay network error message is enabled) message is displayed after an USB disk is plugged into a PCoIP Zero Client.   Cause A heavy load such as autoplay on a flash drive …
Knowledge Base Article Tutorial Peripheral Devices Zero Clients
Last modified: November 24, 2022
499
No audio when using Unified Communications with a USB headset
Problem Some users have reported no audio when using Unified Communications solution in firmware 4.7.0, they can only hear the ring of the incoming call and when the call is answered there is no Rx/Tx audio.   Cause This issue has been tracked down to the …
Knowledge Base Article Troubleshooting Performance Peripheral Devices Zero Clients
Last modified: November 7, 2022
478
When does the PCoIP Management Console apply a resolution change using the Enable Preferred Resolution Override setting while in a PCoIP session?
In PCoIP Management Console (MC) 1.9.1 (and newer), PCoIP Zero Clients with firmware 4.1.2 (and newer) can be configured to override the attached monitors native resolution using the Enable Preferred Resolution Override feature. The setting is recognized …
Knowledge Base Article Troubleshooting Management Display Management Console Zero Clients
Last modified: September 3, 2023
465
MagTek USB Keyboard Emulation Card Swipe Reader (i.e. credit card reader) causes "stuck key" problem
Scenario Occasionally when using a MagTek USB KB Swipe Card Reader attached to a zero client, the card data is read incorrectly. This can cause undefined behaviour. (i.e. a key repeats indefinitely).   Cause Some USB Keyboard Emulation Card Readers have …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: November 7, 2022
451
The VMware Horizon View PCoIP server logs show "IPC Can't encode. Waiting. queue" after a random disconnect.
Problem The VMware Horizon View Client or PCoIP Zero Client experience a random disconnect from the VMware Horizon View session. Inspection of the PCoIP server logs show a high slice rate count after a random disconnect. The following example shows 192 …
Knowledge Base Article Troubleshooting Performance Session Third Party Enhancements Zero Clients
Last modified: September 3, 2023
440
Can't manage zero client after moving it to a different network
Scenario: You had the zero client managed by the management console and then moved the zero client to a different network. You can still connect to your desktop VM. You just cannot manage the zero client. Answer: Since network connectivity is confirmed …
Knowledge Base Article Troubleshooting Management Management Console Zero Clients
Last modified: November 8, 2020
409
What types of USB devices are supported in Linux with the PCoIP Remote Workstation Card?
The Tera2 PCoIP Remote Workstation Card presents a Open Host Controller Interface (OHCI) and Enhanced Host Controller Interface (EHCI), supporting the USB 1.0 and USB 2.0 specifications respectively, via the PCIe 1x connector to the motherboard. If is up …
Knowledge Base Article Advisory Peripheral Devices Remote Workstation Card
Last modified: August 2, 2023
395