How do I reset the configuration parameters entered on my PCoIP Zero Client or PCoIP Remote Workstation Card?
Answer: There are four ways to reset the PCoIP Zero Client to default settings which are described below. The PCoIP Remote Workstation card (also known as a PCoIP host card) has one reset procedure also described below. Some network information will be …
VMware View Client with dual Virtual NICs unable to connect to virtual desktop
Scenario A VMware View Client with dual virtual NICs configured may not be able to connect to the virtual desktop.  Note: this article does not apply to PCoIP Zero Clients. Dual Virtual NICs Configured on the View Client   Cause If the client has been …
Unauthenticated User can take control of PCoIP Management Console by resetting the default password
Summary Teradici PCoIP Management Console versions 20.01.0 and 19.11.1 are vulnerable to unauthenticated password resets of the default admin account. This vulnerability only exists when the default admin account is not disabled. The affected Management …
What does "No Available Hosts for Connection" mean?
The message "No Available Hosts for Connection" appears if the PCoIP Zero Client has enabled the Host Discovery feature and tries to establish a session but cannot find a PCoIP Remote Workstation Card that is not currently in a session on the network. If …
How do I avoid the red "HTTPS" in server address in the Connection Dialog on a PCoIP Zero Client?
All HP Anyware and VMware View 5.1 or newer has connection security requirements that are supported in PCoIP Zero Client firmware 4.0.0 or newer.  There are multiple scenario's with the certificate check that can result in a warning message and/or a red   …
Troubleshooting artifacts in a PCoIP Session
Problem During a PCoIP Session artifacts are appearing on the screen. The artifacts may stay or slowly disappear.   Cause and Resolution There are may reasons artifacts may appear on the screen. Some may be source issues such as the application or …
Why does my PCoIP Zero Client indicate that it is unable to verify the View Connection Server's identity after the CA's root certificate has been uploaded via AWI and/or the PCoIP Management Console?
Problem The PCoIP Zero Client is presenting a certificate error when the server's corresponding Root CA or Intermediate Certificate has been loaded into the PCoIP Zero Client certificate store. The PCoIP Zero Client has a certificate check mode configured …
How do I fix the unsecure browser warning when accessing the PCoIP Management Console web interface?
Problem When accessing the Management Console web interface the web browser displays a message such as "This site is not secure", "Your connection is not secure" or "Your connection is not private"   Cause The web browser cannot validate the security …
What is a PCoIP Zero Client?
Answer: While there are many uses of the term, Teradici defines a PCoIP Zero Client by the following key attributes: Near zero maintenance No OS and application updates/virus checks required No Windows OS (locked down Linux/BSD or RTOS is OK) No ability …