Problem The PCoIP session performance is poor. The logs indicate high packet loss and the error messages related to out of order packets. Note:The default PCoIP server logs will indicate when out of order mode is activated and deactivated. To see …
Direct-connect (no IP network) configurations, sometimes incorrectly referred to as "home-run networks", refer to a direct connection between 2 devices without network switches/hubs installed using straight through cables via patch-panels. Although zero …
PCoIP protocol itself is not sensitive to network latency, however network latency can impact the user experience. The network latency supported by products implementing PCoIP technology depends on the PCoIP host technology being used: PCoIP Remote …
There are many factors impacting the playback of video in a PCoIP environment. Factors that influence video playback are: PCoIP Thin Client or Software Client local hardware capabilities. PCoIP can require a lot of processing power not available on …
Problem When using PCoIP the display is 'blurry' or of low quality. The display may be persistently blurry or is blurry intermittently and slow. Cause Typically a blurry screen is due to the lack of bandwidth. Throughout a PCoIP session, PCoIP network …
PCoIP Audio Features 2 channel Stereo audio Automatic quality adjustment to fit inside the available PCoIP session bandwidth Audio In and Audio Out via the HP Anyware Audio Driver included in the HP Anyware or ALC888 equivalent audio in the PCoIP Remote …
Just like VoIP and video conferencing, PCoIP is a real time protocol. Once a packet is lost in transit, there typically isn't time to re transmit before the PCoIP session is impacted. Therefore, the most acceptable level of loss is 0%. Packet loss maybe …
Since many customers are unlikely to have access to a port mirroring switch, a new packet capture feature was added in firmware 4.7.0. It is designed to assist with troubleshooting Unified Communications issues. Note: The packet capture utility will not …
Scenario A VMware View Client with dual virtual NICs configured may not be able to connect to the virtual desktop. Note: this article does not apply to PCoIP Zero Clients. Dual Virtual NICs Configured on the View Client Cause If the client has been …