Requirements for the Leostream broker to automatically detect a PCoIP Remote Workstation Card?
Requirements For the Leostream broker to automatically detect a Remote Workstation Card the following components must be installed: PCoIP Remote Workstation Card inserted in the host PC Leostream Connection Broker 7.7 or newer Leostream Agent 5.5.95 or …
What is Standalone mode?
  Answer: Standalone mode lets a Tera1 PCoIP Remote Workstation Card operate without installation in a PCIe slot. In Standalone mode, the PCoIP Remote Workstation Card is powered from a floppy drive (+5V/+12V) power connector instead of from a PCIe slot. …
Skipped compressing pkt due to PCM bit length in the PCoIP Remote Workstation Card Logs
Scenario User notices poor audio quality when connected to a PCoIP Remote Workstation Card (host card), and the following entries are in the PCoIP Remote Workstation Card's logs: 12/04/2013, 00:01:41> LVL:3 RC: 0 AUDIO_CMPRS :Skipped compressing pkt due …
After upgrading Windows, why can I no longer wake my PCoIP Remote Workstation Card host from the PCoIP Zero Client?
Wake-on-LAN behaviour changed from Windows 7 to Windows 8, 8.1 and 10, preventing the PCoIP Zero Client from waking the host PC if the PCoIP Zero Client was configured to send the WoL packet to the host PC NIC and not the PCoIP Remote Workstation Card. …
Can I enable NTP time on a PCoIP Zero Client or PCoIP Remote Workstation Card using DHCP options?
Answer: Yes. NTP time servers can be added to DHCP options 042 based on IP scope or as a default for all IP scopes. It is important to note that this feature may impact setting the time server by the PCoIP Management Console Profile or the Administrator …
Collecting PCoIP Management Console log files for Teradici Global Support Services
Problem When issues occur with the PCoIP Management Console  Teradici Global Support Services request a copy of the log files for better insight in the issue at hand to expedite a resolution.   Resolution To retrieve the log files from a PCoIP Management …
Why do I see black bars on the side or bottom of my display when connecting to a zero client?
Scenario : When connecting a display (TV or monitor) to a PCoIP zero client you get solid black bars at the top and bottom or left and right sides of the display. It appears as if the image is being cut off. Resolution : This issue is caused by ' …
Do all log entries marked (CAUTION!) indicate a possible critical issue?
No, log entries marked with (CAUTION!) are not necessarily a critical issue. The case below states such a case but it is still essential to note these log entries could be indicative of a potential issue.   Scenario 1 You see caution errors similar to the …