How do I enable NTP on PCoIP Zero Clients and PCoIP Remote Workstation Cards?
Enabling NTP is important on the PCoIP Zero Client and PCoIP Remote Workstation Card. NTP is using for the following: Setting the time and date of the PCoIP Zero Client and PCoIP Remote Workstation Card. As there is no battery on the devices, the time and …
How do I enable and disable the PCoIP Zero Client session disconnect CTRL-ALT-F12 key sequence?
Enable When using a PCoIP Zero Client to connect to HP Anyware, Amazon Workspaces or VMware Horizon View the Ctrl-Alt-F12 shortcut is enabled by default. This setting can be configured via the AWI or PCoIP Management Console. When using a workstation with …
Imprivata OneSign 4.9 SP1 causes instabilities with the password entry when connected to PCoIP Zero Clients.
Answer: Password authentication instabilities specific to Imprivata OneSign version 4.9 SP1 (released Oct 1st, 2014) and PCoIP Zero Clients are described below. Scenario 1: Once a user has successfully authenticated using a valid username and password, …
How do I reset the configuration parameters entered on my PCoIP Zero Client or PCoIP Remote Workstation Card?
Answer: There are four ways to reset the PCoIP Zero Client to default settings which are described below. The PCoIP Remote Workstation card (also known as a PCoIP host card) has one reset procedure also described below. Some network information will be …
How do I avoid the red "HTTPS" in server address in the Connection Dialog on a PCoIP Zero Client?
All HP Anyware and VMware View 5.1 or newer has connection security requirements that are supported in PCoIP Zero Client firmware 4.0.0 or newer.  There are multiple scenario's with the certificate check that can result in a warning message and/or a red   …
Why does my PCoIP Zero Client indicate that it is unable to verify the View Connection Server's identity after the CA's root certificate has been uploaded via AWI and/or the PCoIP Management Console?
Problem The PCoIP Zero Client is presenting a certificate error when the server's corresponding Root CA or Intermediate Certificate has been loaded into the PCoIP Zero Client certificate store. The PCoIP Zero Client has a certificate check mode configured …
How do I fix the unsecure browser warning when accessing the PCoIP Management Console web interface?
Problem When accessing the Management Console web interface the web browser displays a message such as "This site is not secure", "Your connection is not secure" or "Your connection is not private"   Cause The web browser cannot validate the security …
How to configure an Amazon Network Load Balancer (NLB) with the PCoIP Connection Manager and Security Gateway or HP Anyware Connector
The following article provides an example on how to  setup an Amazon Network Load Balancer with the PCoIP Connection Manager and Security Gateway (CM/SG) or HP Anyware Connector (CAC). Prerequisites:   Connection Manager & Security Gateway: 1. Deploy the …
Alternative method to export the View Connection Server trusted root certificate for upload to PCoIP Zero Clients
The recommended options is to contact the VMware Horizon View administrator to obtain the recommended certificate. If this option is not available, the easiest way to obtain the certificate is to use a web browser and browse to  …