How much latency does PCoIP technology add to the remote system?
The latency added by PCoIP technology to a remote system is related to the time to encode (compression) and decode (decompression) for the PCoIP protocol, which depends on the implementation. Total end-to-end latency is determined by OS latency and …
Knowledge Base Article Advisory Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: July 28, 2023
1376
Getting blank screen or "source signal on other port" when connecting from zero client to VMware Horizon
Scenario: When using a PCoIP zero client connecting to VMware VM running Horizon Agent 8.2 if the VMware remote console is open while user is in session the zero client will display a blank screen or you may receive a message "source signal on other …
Knowledge Base Article Troubleshooting Display Third Party Enhancements Zero Clients
Last modified: September 3, 2023
1259
Mirroring displays on PCoIP Zero Clients
Requirements Tera2 dual port client (TERA2321) Firmware 4.1 or newer   Instructions From the PCoIP Zero Client's onscreen display (OSD) or both versions of the Management Console OSD - browse to Options > Configuration > Display > Enable Display Cloning …
Knowledge Base Article Tutorial Display Zero Clients
Last modified: November 7, 2022
1254
Why do I hear pops and crackles or dead air in my PCoIP session when connecting with a PCoIP Zero Client?
This article refers to the audio playback using the PCoIP Analog Audio Data Channel from a host machine to a PCoIP Zero Client. It does not apply to microphone input from a PCoIP Zero Client to a VM.   Problem The PCoIP Zero Client must have either an …
Knowledge Base Article Troubleshooting Performance Zero Clients
Last modified: December 20, 2023
1187
Why does touchscreen calibration not work with a resolution other then native resolution?
Answer: Calibration for touchscreens via Teradici PCoIP firmware is designed to work from the OSD in native resolution with elo branded touch screens. To calibrate from a different resolution other than native, the elo device must be bridged and the elo …
Knowledge Base Article Advisory Display Zero Clients
Last modified: September 21, 2023
1016
How do I change the image quality properties of a PCoIP Remote Workstation Card?
Review the below table to understand where to change the image quality properties in a remote workstation environment. This information applies to sessions between PCoIP Zero Clients and a PCoIP Remote Workstation Card (i.e. host card). If you are using a …
Knowledge Base Article Tutorial Performance Display Setup Zero Clients
Last modified: July 31, 2023
957
Random Session Disconnects due to Spanning Tree Configuration
Scenario PCoIP sessions experience random session disconnects of some or all clients. Re connection is not always possible straight away.   Cause A Spanning Tree Protocol (STP) re-calculation can cause random session disconnects. STP will cause the …
Knowledge Base Article Troubleshooting Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: December 9, 2022
912
Why is my display not working correctly when using an adaptor attached to my OEM supplied cable?
Problem After purchasing a HP Anyware product you discover the cable shipped with the HP Anyware product does not have the necessary Video/Display connector to interface with your GPU or monitor. To complete the connection an adaptor is used to change the …
Knowledge Base Article Troubleshooting Display Setup Remote Workstation Card Zero Clients
Last modified: September 14, 2023
887
What PCoIP GPO settings in VMware Horizon View take effect immediately after the change is made?
Answer: There are currently 4 GPO settings which changes take effect immediately. These are available in Horizon View 5.2 and are listed below along with links to the individual GPO descriptions. In Horizon View 5.3 an additional GPO was added to this …
Knowledge Base Article Advisory Setup Performance Third Party Enhancements Zero Clients
Last modified: September 3, 2023
807