Do PCoIP Zero Clients support USB devices with a visible cursor, such as slate and scribe tablets when bridged to VMware Horizon View?
PCoIP Zero Clients support usb devices ( slate/scribe/pen tablets etc. ) but further configuration may be required. Scenario After connecting your device you can use the tablet for basic cursor movement and mouse click operations just like a regular …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: September 3, 2023
1202
Why is USB not working when connecting a PCoIP Zero Client to a PCoIP Remote Workstation Card?
By default, all USB devices are bridged to the host with the PCoIP Remote Workstation Card and is dependent on the host OS. Please verify the following Make sure the USB devices are not unauthorized in the PCoIP Remote Workstation Card or PCoIP Zero …
Knowledge Base Article Troubleshooting Peripheral Devices Remote Workstation Card Zero Clients
Last modified: September 3, 2023
1203
Displays
After completing this unit, you’ll be able to: Understand the different display configurations. Understand the supported resolutions 20 mins With PCoIP, you can configure several display settings as described below.   Display Resolutions PCoIP supports …
Knowledge Base Article Tutorial Display HP Anyware
Last modified: September 5, 2023
1187
Is it possible to disable the serial port on my Samsung PCoIP Zero Client monitor?
Scenario: Some PCoIP zero clients (i.e. Samsung PCoIP Zero Client monitors) come equipped with a serial port. The units are designed with a built in USB hub feeding both another USB connector and a serial connector. In a PCoIP session, the VM picks up the …
Knowledge Base Article Tutorial Peripheral Devices Zero Clients
Last modified: September 22, 2023
1024
Why does touchscreen calibration not work with a resolution other then native resolution?
Answer: Calibration for touchscreens via Teradici PCoIP firmware is designed to work from the OSD in native resolution with elo branded touch screens. To calibrate from a different resolution other than native, the elo device must be bridged and the elo …
Knowledge Base Article Advisory Display Zero Clients
Last modified: September 21, 2023
1016
How do I change the image quality properties of a PCoIP Remote Workstation Card?
Review the below table to understand where to change the image quality properties in a remote workstation environment. This information applies to sessions between PCoIP Zero Clients and a PCoIP Remote Workstation Card (i.e. host card). If you are using a …
Knowledge Base Article Tutorial Performance Display Setup Zero Clients
Last modified: July 31, 2023
958
Why is my display not working correctly when using an adaptor attached to my OEM supplied cable?
Problem After purchasing a HP Anyware product you discover the cable shipped with the HP Anyware product does not have the necessary Video/Display connector to interface with your GPU or monitor. To complete the connection an adaptor is used to change the …
Knowledge Base Article Troubleshooting Display Setup Remote Workstation Card Zero Clients
Last modified: September 14, 2023
887