What is the DHCP request timeout on a PCoIP Zero Client or PCoIP Remote Workstation Card?
The PCoIP Zero Client and PCoIP Remote Workstation Card will attempt to get a DHCP lease 4 times after power on or after the network link comes up. When a PCoIP device is connected to a network with no DHCP server and the DHCP request time-out period …
Knowledge Base Article Advisory Performance Remote Workstation Card Zero Clients
Last modified: July 3, 2020
769
Can I replace the PCoIP Management Console's Self-Signed SSL certificate with a certificate signed by a Certificate Authority?
PCoIP Management Console  PCoIP Management Console supports replacement of the default HP Anyware self signed certificate. It is recommended that this certificate be replaced by a certificated signed by a trusted Certificate Authority. For instructions on …
Knowledge Base Article Advisory Security Management Console
Last modified: September 3, 2023
759
What are my options for using PCoIP between trusted and untrusted networks?
PCoIP is encrypted by default and it cannot be disabled. This makes PCoIP itself secure on untrusted networks. To get PCoIP traffic from untrusted networks to PCoIP Hosts the following options can be used: Over a VPN that is UDP compatible. An SSL VPN …
Knowledge Base Article Advisory Security Performance HP Anyware
Last modified: September 3, 2023
737
Do PCoIP Zero Clients and PCoIP Remote Workstation Cards support HDMI connections?
PCoIP zero clients only come with the following connections: sVGA DVI (single and dual link) Display Port (1.1a) HDMI is not a supported connector type on PCoIP Zero Clients. You can purchase Display Port or DVI to HDMI cables and adapters however you may …
Knowledge Base Article Advisory Display Setup Remote Workstation Card Zero Clients
Last modified: July 31, 2023
727
Can I use both DHCP options and DNS SRV records for device discovery in the PCoIP Management Console at the same time?
Answer: No . Note: It is recommended to user either DHCP Options or DNS Records when configuring auto-discovery for the PCoIP Management Console. To determine which to use you need to understand your environment. For example if you are only going to have …
Knowledge Base Article Advisory Management Management Console
Last modified: September 7, 2023
682
What network switch or router queue size should be used?
Network device queues, also known as network buffer's, should be configured to accommodate 50ms to 100ms of PCoIP protocol traffic in total. This assumes that one network device (e.g. switch or router) is congested for a given network path. If the network …
Knowledge Base Article Advisory Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: September 19, 2023
667