Is it possible to configure the PCoIP Zero Client or PCoIP Remote Workstation Card device name via the hostname option on my DHCP server?
Answer: No you cannot name devices via DHCP, but you can pass your hostname from your PCoIP device to the DHCP server. PCoIP Zero Clients or PCoIP Remote Workstation Cards will pass DHCP options 12 (hostname) and option 15 (domain name) to the DHCP …
Knowledge Base Article Advisory Setup Remote Workstation Card Zero Clients
Last modified: September 8, 2023
529
What types of USB devices are supported in Linux with the PCoIP Remote Workstation Card?
The Tera2 PCoIP Remote Workstation Card presents a Open Host Controller Interface (OHCI) and Enhanced Host Controller Interface (EHCI), supporting the USB 1.0 and USB 2.0 specifications respectively, via the PCIe 1x connector to the motherboard. If is up …
Knowledge Base Article Advisory Peripheral Devices Remote Workstation Card
Last modified: August 2, 2023
393
Do PCoIP Zero Clients and PCoIP Remote Workstation Cards support dynamic DNS?
Dynamic DNS allows for method of keeping a domain name record linked to a changing IP address. PCoIP Zero Clients and PCoIP Remote Workstation Cards do not currently support Dynamic DNS registration. They rely on the DHCP server to register the name when …
Knowledge Base Article Advisory Setup Remote Workstation Card Zero Clients
Last modified: September 7, 2023
334
Why doesn't the PCoIP Remote Workstation Card power up when it is installed to a particular PCIe slot?
This may be due to the restrictions of your host PC's motherboard that requires you to install graphics cards or other PCIe cards into certain PCIe slots. If a PCIe card is installed into an inappropriate PCIe slot, the host PC may stop loading any …
Knowledge Base Article Troubleshooting Setup Remote Workstation Card
Last modified: November 22, 2022
313
How do I configure wake-on-LAN with the AMD R5000 PCoIP Remote Workstation Card?
There are three ways to configure wake-on-LAN with the AMD R5000 PCoIP Remote Workstation Card. Option 1: Use the PC NIC and PCoIP Host Software  For instructions, refer to How do I remotely power on the host PC/workstation through its network interface …
Knowledge Base Article Tutorial Setup Remote Workstation Card
Last modified: August 23, 2018
265
Why is the host PC on my VMware Horizon brokered Remote Workstation Solution unable to wake up?
Scenario When a View Connection Server brokers a workstation connection between a PCoIP Zero Client and a PCoIP Remote Workstation Card, and the host is put into any low power state (sleep, hibernate or shutdown); the client is unable to wake the host and …
Knowledge Base Article Troubleshooting Setup Performance Third Party Enhancements Remote Workstation Card Zero Clients
Last modified: September 20, 2023
267
Why does the mouse and keyboard to work on my Fujitsu CELSIUS (C620, M730, or M720) when using a PCoIP Remote Workstation Card?
Answer: In some cases, when connected to a PCoIP Remote Workstation Card, users can't use their mouse and keyboard. Fujitsu has resolved the issue via a BIOS update. For more information, or for support related to this issue, please contact Fujitsu or …
Knowledge Base Article Troubleshooting Peripheral Devices Remote Workstation Card
Last modified: November 22, 2022
258