How many VMware View pools are supported by PCoIP Zero Clients?
PCoIP Zero Clients support up to 10 desktop pools when using Firmware 3.2.0 or earlier.  Firmware 3.3.0 and later increased support for the number of pools to 100. When more than 100 pools are configured, the PCoIP Zero Client becomes unresponsive for a …
What SFP modules have HP Anyware tested with the PCoIP Zero Client and PCoIP Remote Workstation Card?
Warning:  This is not a comprehensive list and contains modules that have been tested and/or deployed successfully in client environments. Since SPF modules are built by different manufacturers which may implement different engineering designs, it is …
What PCoIP GPO settings in VMware Horizon View take effect immediately after the change is made?
Answer: There are currently 4 GPO settings which changes take effect immediately. These are available in Horizon View 5.2 and are listed below along with links to the individual GPO descriptions. In Horizon View 5.3 an additional GPO was added to this …
What is the DHCP request timeout on a PCoIP Zero Client or PCoIP Remote Workstation Card?
The PCoIP Zero Client and PCoIP Remote Workstation Card will attempt to get a DHCP lease 4 times after power on or after the network link comes up. When a PCoIP device is connected to a network with no DHCP server and the DHCP request time-out period …
Can I replace the PCoIP Management Console's Self-Signed SSL certificate with a certificate signed by a Certificate Authority?
PCoIP Management Console  PCoIP Management Console supports replacement of the default HP Anyware self signed certificate. It is recommended that this certificate be replaced by a certificated signed by a trusted Certificate Authority. For instructions on …
Do PCoIP Zero Clients and PCoIP Remote Workstation Cards support HDMI connections?
PCoIP zero clients only come with the following connections: sVGA DVI (single and dual link) Display Port (1.1a) HDMI is not a supported connector type on PCoIP Zero Clients. You can purchase Display Port or DVI to HDMI cables and adapters however you may …
Can I use both DHCP options and DNS SRV records for device discovery in the PCoIP Management Console at the same time?
Answer: No . Note: It is recommended to user either DHCP Options or DNS Records when configuring auto-discovery for the PCoIP Management Console. To determine which to use you need to understand your environment. For example if you are only going to have …