Teradici Documentation and Downloads | Documents and Downloads for Teradici products

Sort by

Does the TERA2321 support the SGMII interface for a copper SFP?

Answer: No. The Tera2321 only supports MII (10/100Mbps) or RGMII (10/100/1000Mbps) copper/fiber interfaces. Definitions : SGMII - Serial Gigabit Media Independent Interface. RGMII - Reduced Gigabit Media Independent Interface. MII - Media Independent …

Unable to start docker containers connector_cm and connector_connectorgateway during HP Anyware Connector installation

In Ubuntu 18.04.4 LTS or Ubuntu 18.04.5 LTS setting up HP Anyware Connector, if IPV6 was disabled in the vm those 2 containers will always fail to start. During the installation or reinstallation of the HP Anyware Connector, connector_cm and …

Does the PCoIP Management Console 2.x and 3.x ship with a default certificate?

Yes. The PCoIP Management Console since release 2.x ships with a HP Anyware self-signed certificate to allow the PCoIP Management Console to function out of the box. It is recommended that all users deploying the PCoIP Management Console 2.x or …

Does PCoIP support DDC/CI to remotely controlled display settings?

To remotely control display settings using DDC/CI, you need: PCoIP Zero Client with firmware 2.3 or newer Monitor that supports DDC/CI that is connected to the PCoIP Zero Client. The DDC/CI protocol is vendor specific. To date, the NEC version of the …

How do I make PCoIP Remote Workstation Card USB devices work on my Fujitsu CELSIUS R930 workstation?

Answer: If USB devices won't work on a R930, move the PCoIP Remote Workstation Card to a PCIe slot that is serviced by a populated CPU socket. Why this is necessary: The R930 has two sockets. If the unit ships with only one socket populated (a single …

Recovering the OSD when the resolution was set to 800x600 or lower which removed functionality.

This occurs because these low resolutions do not display the OSD correctly, and access to some configurations are lost. Previously this was not an available feature which prevented devices being put into un-configurable states by setting resolutions to …

Could the use of two DVI channels be a sources for delay which might cause jitter in a PCoIP Remote Workstation Card configuration?

Using the two DVI channels on a PCoIP Zero Client to PCoIP Remote Workstation Card with the Dual-link DVI connector converter to achieve a 2560x1600 resolution is NOT a source for delay which might cause jitter. The use of two DVI channels could be one of …

Can I share the network connection of the PCoIP Remote Workstation Card with that of the host PC/workstation?

No, the network interface on the PCoIP Remote Workstation Card is independent to that of the host. It is not possible to communicate to the host operating system via the PCoIP Remote Workstation Card network interface. Therefore, you must connect both the …

Can a PCoIP Zero Client control the reset button on a PCoIP Remote Workstation card machine?

No. The PCoIP Remote Workstation card is only designed to work with the Power Button of the remote workstation. … Can a PCoIP Zero Client control the reset button on a PCoIP Remote Workstation card …

Can I use VirtualBox to deploy the Management Console?

Answer: Yes, both the OVA and the RPM release of the Management Console can be installed in VirtualBox however HP Anyware do not support the Management Console when deployed in this manner. While it will work it has not be tested and will not be added to …

Filter by Products

Filter by Topics

Search Knowledge Center

Filter by Products

Filter by Topics