What types of USB devices are supported in Linux with the PCoIP Remote Workstation Card?
The Tera2 PCoIP Remote Workstation Card presents a Open Host Controller Interface (OHCI) and Enhanced Host Controller Interface (EHCI), supporting the USB 1.0 and USB 2.0 specifications respectively, via the PCIe 1x connector to the motherboard. If is up …
Knowledge Base Article Advisory Peripheral Devices Remote Workstation Card
Last modified: August 2, 2023
395
Should I configure "Maximum Initial Image Quality" to 100 if I want lossless still image?
No. Regardless of PCoIP image-quality settings, still images are always lossless. The time it takes to display them depends on your image-quality settings and available network bandwidth. For most situations, it is recommended to use 40 for Minimum Image …
Knowledge Base Article Advisory Performance Display Remote Workstation Card HP Anyware Zero Clients
Last modified: December 9, 2022
390
PCoIP Configuration Guide
Helps you to understand the configurations that you can do on PCoIP Agents and Clients. ~65 mins This course will help you to understand the different configurations that can be done on the Agents and Client in order to optimize PCoIP performance. After …
Knowledge Base Article Courses Setup HP Anyware
Last modified: September 3, 2023
391
Why can I use my cell phone to transfer files when I have blocked all mass storage devices through the Unauthorized Devices table?
There are 3 ways to transfer data to USB devices. Mass storage devices (flash drives, DVD), all file types Photo Transfer Protocol - PTP - still image capture device class for cameras, (pictures). Media Transport Protocol - MTP - (smartphones), all file …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: November 17, 2022
387
Why my HP Anyware active directory service account user is failing to login to HP Anyware management interface?
Cause: Currently HP Anyware Manager does not allow domain administrators to be part of any group other than Domain Admins.  Solution: It is a known issue in HP Anyware Manger and bug has already been created for this issue. We are working to let customers …
Knowledge Base Article Troubleshooting Management HP Anyware
Last modified: September 19, 2023
380
Configuring PCoIP Agents
After completing this unit, you’ll be able to: Understand the requirements for using configurations Understand the procedure to configure agent machine 40 mins PCoIP agents can be configured to optimize the PCoIP performance and behavior and these …
Knowledge Base Article Tutorial Setup HP Anyware
Last modified: December 10, 2022
376
Is the current Texas Instruments USB to serial adapter in the Samsung NC241 compatible with View 5.0?
Answer: No, the current Texas Instruments USB to serial adapter built in to the Samsung NC241 is not compatible with View 5.0, or with the latest TI drivers. For View 5.0 an older legacy driver must be used. This driver must be obtained directly from …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: August 1, 2018
362
Why do I see black bars on the side or bottom of my display when connecting to a zero client?
Scenario : When connecting a display (TV or monitor) to a PCoIP zero client you get solid black bars at the top and bottom or left and right sides of the display. It appears as if the image is being cut off. Resolution : This issue is caused by ' …
Knowledge Base Article Troubleshooting Display HP Anyware Remote Workstation Card Zero Clients
Last modified: July 15, 2023
341