Do PCoIP Zero Clients support VLAN tagging?
HP Anyware PCoIP Zero Clients do not support VLAN tagging. If an environment requires VLAN tagging, tagging will need to be performed on a network device's (switch / router) through configuration as as placing the port in access mode and tagging the …
Do all log entries marked (CAUTION!) indicate a possible critical issue?
No, log entries marked with (CAUTION!) are not necessarily a critical issue. The case below states such a case but it is still essential to note these log entries could be indicative of a potential issue.   Scenario 1 You see caution errors similar to the …
Why do I see black bars on the side or bottom of my display when connecting to a zero client?
Scenario : When connecting a display (TV or monitor) to a PCoIP zero client you get solid black bars at the top and bottom or left and right sides of the display. It appears as if the image is being cut off. Resolution : This issue is caused by ' …
Why does the Management Console not recognize the DNS-SRV records and not connect with my PCoIP Zero Clients?
Scenario On a non-Microsoft DNS server, the DNS records have been created and the SRV record set for auto-discovery. However, the PCoIP Management Console is not recognizing these records and the PCoIP Zero Client devices are not registering in the …
Do PCoIP Zero Clients and PCoIP Remote Workstation Cards support dynamic DNS?
Dynamic DNS allows for method of keeping a domain name record linked to a changing IP address. PCoIP Zero Clients and PCoIP Remote Workstation Cards do not currently support Dynamic DNS registration. They rely on the DHCP server to register the name when …
Reverting to Legacy Certificates after changing the PCoIP Management Console 2.x and 3.x certificate causes the web interface to fail to load
Problem The certificate of the PCoIP Management Console has been updated but the web interface now fails to load.   Cause After uploading the new certificate to the PCoIP Management Console, if your any reason that certificate is not supported, the web …
Profile application to Remote Workstation Card fails
Scenario : The remote workstation card is at a factory default. You set a basic Profile in the management console and apply the Profile. The Profile application fails. If you check the management console, there is no clue as to why the Profile failed. If …
When using Management Console 3.0.0 I am not able to manage zero clients?
Impacts:   PCoIP Management Console 3.0.0 Scenario: When migrating from Management Console 2.x to Management Console 3.0.0 many zero clients fail to connect to the management console. If the management console is power cycled the zero clients are now able …