Sample nginx configuration for proxy when using remote device management
This is a sample configuration when using an NGINX version 1.9.9 reverse proxy. It was used for an NGINX system installed on CentOS 7. You will be required to modify the highlighted unique fields for your environment. Other reverse proxy systems may …
How to obtain the correct current certificate to upload to the PCoIP Zero Client certificate store in VMware Horizon View environments.
Background: This Knowledge Base article is limited to PCoIP Zero Clients in VMware Horizon View environments. The certificate(s) loaded on the PCoIP zero client ensures that the peer server it connects to is trusted. The certificate can be provided from a …
How do I check for packet loss on the ESX interface?
If there is packet loss on a PCoIP protocol session, but an analysis of network devices in the path show no loss and they have been properly configured (see  Network session checklist for PCoIP protocol LAN and WAN deployments ) then you may want to …
PCoIP HP Anyware Webcam Support
USB Webcams are supported with Teradici HP Anyware when connecting to a PCoIP Agent for Windows. Webcams can be used with Microsoft Teams, Zoom, and other conferencing applications running on the remote desktop.   The models outlined in the table below …
Configuration of smart cards with PCoIP Zero Clients and VMWare Horizon
This article is provided to help administrators in setting up smart card authentication in zero clients connecting to VMWare Horizon. This article has been reviewed against the following supported hardware and software versions: VMware Horizon 7.2 PCoIP …
Using HP Anyware PCoIP Zero Clients and Remote Workstation Cards on a direct-connect (no IP) network
Direct-connect (no IP network) configurations, sometimes incorrectly referred to as "home-run networks", refer to a direct connection between 2 devices without network switches/hubs installed using straight through cables via patch-panels. Although zero …
How to setup Windows Server 2008 R2 as an 802.1X Authentication Server.
The following guide shows an example Windows Server 2008 R2 configuration for use with the PCoIP Zero Client and PCoIP Remote Workstation Cards. The example sets up a brand new environment including a Active Directory Domain. It is recommended this …
Linux DHCP server configuration when using DHCP Discovery on PCoIP Management Console 2.x and 3.x
Answer: This is based on PCoIP Management Console 2.x and newer only This is an example of configuring a Linux DHCP server when using DHCP Option for device discovery. The DHCP server is configured by editing the configuration file: /etc/dhcpd.conf This …
Using a custom display resolution and the Hot Plug Reset function on a PCoIP Zero Client
Setting a custom display resolution A PCoIP Zero Client allows you to set a custom display resolution on the client, which is saved even when the client is powered down. This lets you set a resolution that is different than the attached display's native …