What is the DHCP request timeout on a PCoIP Zero Client or PCoIP Remote Workstation Card?
The PCoIP Zero Client and PCoIP Remote Workstation Card will attempt to get a DHCP lease 4 times after power on or after the network link comes up. When a PCoIP device is connected to a network with no DHCP server and the DHCP request time-out period …
Knowledge Base Article Advisory Performance Remote Workstation Card Zero Clients
Last modified: July 3, 2020
769
What are my options for using PCoIP between trusted and untrusted networks?
PCoIP is encrypted by default and it cannot be disabled. This makes PCoIP itself secure on untrusted networks. To get PCoIP traffic from untrusted networks to PCoIP Hosts the following options can be used: Over a VPN that is UDP compatible. An SSL VPN …
Knowledge Base Article Advisory Security Performance HP Anyware
Last modified: September 3, 2023
740
How does competing traffic on the network affect PCoIP performance?
This article outlines how other types of network traffic may negatively impact PCoIP performance. Please refer to  Network session checklist for PCoIP protocol LAN and WAN deployments  for more details on network configuration. On most modern LAN's, …
Knowledge Base Article Tutorial Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: September 3, 2023
698
Upgrading from firmware 3.4.x or earlier, a message displays indicating my USB devices failed authorization
Problem When upgrading PCoIP Zero Client firmware from 3.4.x, USB locally terminated devices work, but no redirected (bridged) USB devices work. When viewing attached devices in the Administrator Web Interface (AWI) only the mouse and keyboard show as …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: September 25, 2023
690
What are the possible reasons for jitter on a 30 inch monitor when compared to a 24 inch monitor connected to the same Tera2 Remote Workstation Card?
Problem In a single workstation environment when comparing a 30 inch monitor at 2560x1600 to a 24 inch monitor at 1920x1600, moving a window containing a running video in the 30 inch screen shows latency and window drag when compared to the 24 inch …
Knowledge Base Article Troubleshooting Display Performance Remote Workstation Card
Last modified: December 9, 2022
693
Can I use both DHCP options and DNS SRV records for device discovery in the PCoIP Management Console at the same time?
Answer: No . Note: It is recommended to user either DHCP Options or DNS Records when configuring auto-discovery for the PCoIP Management Console. To determine which to use you need to understand your environment. For example if you are only going to have …
Knowledge Base Article Advisory Management Management Console
Last modified: September 7, 2023
683
Installing Management Console
After completing this unit, you’ll be able to: Install the HP Anyware Management Console, or Migrate to a newer version 25 mins   HP Anyware Management Console is released in three formats that feature CentOS as the PCoIP Management Console installation …
Knowledge Base Article Tutorial Management Setup Management Console
Last modified: August 2, 2023
670
My PCoIP Zero Clients at the remote location cannot connect to PCoIP Management Console 3.x
Problem PCoIP Zero Clients in remote locations are not connecting to the PCoIP Management Console 3.x   Cause This issue was tracked down to a setting in the PCoIP Management Console 3.x (MC). Check under Settings > Remote and confirm if you have entered …
Knowledge Base Article Troubleshooting Management Management Console
Last modified: November 7, 2022
668
What network switch or router queue size should be used?
Network device queues, also known as network buffer's, should be configured to accommodate 50ms to 100ms of PCoIP protocol traffic in total. This assumes that one network device (e.g. switch or router) is congested for a given network path. If the network …
Knowledge Base Article Advisory Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: September 19, 2023
669