How do I make PCoIP Remote Workstation Card USB devices work on my Fujitsu CELSIUS R930 workstation?
Answer: If USB devices won't work on a R930, move the PCoIP Remote Workstation Card to a PCIe slot that is serviced by a populated CPU socket. Why this is necessary: The R930 has two sockets. If the unit ships with only one socket populated (a single …
Knowledge Base Article Troubleshooting Setup Peripheral Devices Remote Workstation Card
Last modified: September 3, 2023
223
Could the use of two DVI channels be a sources for delay which might cause jitter in a PCoIP Remote Workstation Card configuration?
Using the two DVI channels on a PCoIP Zero Client to PCoIP Remote Workstation Card with the Dual-link DVI connector converter to achieve a 2560x1600 resolution is NOT a source for delay which might cause jitter. The use of two DVI channels could be one of …
Knowledge Base Article Advisory Performance Display Remote Workstation Card Zero Clients
Last modified: July 3, 2020
213
Can I share the network connection of the PCoIP Remote Workstation Card with that of the host PC/workstation?
No, the network interface on the PCoIP Remote Workstation Card is independent to that of the host. It is not possible to communicate to the host operating system via the PCoIP Remote Workstation Card network interface. Therefore, you must connect both the …
Knowledge Base Article Advisory Setup Remote Workstation Card
Last modified: July 3, 2020
212
What does GSOAP :tera_gsoap_tls_shutdown: tera_rtos_event_get timeout mean in the log?
Problem Message GSOAP :tera_gsoap_tls_shutdown: tera_rtos_event_get timeout is found in host or client log file.   Cause GSOAP is the protocol used by the PCoIP Management Console 1.x. This error is caused by a socket being opened by GSOAP and not closed …
Knowledge Base Article Troubleshooting Management Management Console Remote Workstation Card Zero Clients
Last modified: September 8, 2023
196
PCoIP Remote Workstation Card Software does not install on host.
When the PCoIP Remote Workstation Card Software does not detect a PCoIP Remote Workstation Card, it generates the following error and installation stops.   No PCoIP devices detected. Please ensure the hardware is installed and the Host Driver Function is …
Knowledge Base Article Troubleshooting Setup Remote Workstation Card
Last modified: September 3, 2023
160
Management Console profile with blacklisted ciphers fails to apply to Remote Workstation Card
If a Management Console profile is configured to blacklist any of the following Remote Workstation Card ciphers, the profile application will fail on Remote Workstation Cards running firmware 21.01 or newer. TLS_RSA_WITH_AES_256_GCM_SHA384 …
Knowledge Base Article Troubleshooting Management Management Console
Last modified: September 3, 2023
150
Disable IPv6 in HP Anyware agent
IPv6 is enabled by default in HP Anyware agent starting agent 21.07 release.    Disable IPv6 (Only IPv4 connection is allowed)   Windows agent Open  Registry Editor .  Add registry value under   …
Knowledge Base Article Advisory Setup HP Anyware
Last modified: September 3, 2023
151
Why are some resolutions not available in the OSD but are listed as available in the PCoIP Zero Client Administrator's Guide?
This article is applicable to PCoIP Zero Clients that have DVI ports. To see all the supported resolutions in the OSD as listed in the PCoIP Zero Client Administrators' Guide ( GUI Reference > Configuring OSD Display Settings > OSD Dual-display: Display …
Knowledge Base Article Advisory Display Zero Clients
Last modified: September 3, 2023
123