What are my options for using PCoIP between trusted and untrusted networks?
PCoIP is encrypted by default and it cannot be disabled. This makes PCoIP itself secure on untrusted networks. To get PCoIP traffic from untrusted networks to PCoIP Hosts the following options can be used: Over a VPN that is UDP compatible. An SSL VPN …
Knowledge Base Article Advisory Security Performance HP Anyware
Last modified: September 3, 2023
736
How does competing traffic on the network affect PCoIP performance?
This article outlines how other types of network traffic may negatively impact PCoIP performance. Please refer to  Network session checklist for PCoIP protocol LAN and WAN deployments  for more details on network configuration. On most modern LAN's, …
Knowledge Base Article Tutorial Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: September 3, 2023
696
What network switch or router queue size should be used?
Network device queues, also known as network buffer's, should be configured to accommodate 50ms to 100ms of PCoIP protocol traffic in total. This assumes that one network device (e.g. switch or router) is congested for a given network path. If the network …
Knowledge Base Article Advisory Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: September 19, 2023
665
What is the impact of minimum and maximum initial image quality on a PCoIP Session?
Minimum and maximum initial image quality sets the lower and upper quality level. The default values in HP Anyware is Q40 for the minimum initial image quality and Q80 for the maximum initial image quality. If PCoIP estimates there is adequate bandwidth …
Knowledge Base Article Advisory Display Performance Remote Workstation Card HP Anyware
Last modified: July 31, 2023
625
Should I use an initial image quality of Q100?
An initial image quality of Q100 will deliver the highest quality of image PCoIP can deliver. Q100 is not lossless, for a lossless image, build to lossless must be enabled.  How to configure the Turn off Build-to-Lossless feature session variable in GPO …
Knowledge Base Article Advisory Display Performance Remote Workstation Card Zero Clients HP Anyware
Last modified: August 1, 2023
610
How do I update the HP Anyware registration code in HP Anyware Manager?
This article illustrates how to update the HP Anyware registration code in HP Anyware Manager. The steps in this article are for Microsoft Azure only.   Requirements HP Anyware Manager has been deployed, up and running. Admin access to HP Anyware Manager …
Knowledge Base Article Tutorial Licensing Management HP Anyware
Last modified: September 3, 2023
606
Configures the PCoIP transport header
Configures the PCoIP transport header with the following options: When set to Enabled , the configured session priority of high , medium , or low is used. When set to Not Configured , then the default of medium session priority is used. When set to …
Knowledge Base Article Tutorial Session HP Anyware
Last modified: September 19, 2023
594
ICMP packets are being send from the machine at the start of the PCoIP session
Problem At the start of a PCoIP session a network trace or firewall logs are recording ICMP packet being sent from the machine. Further investigation shows they are from the PCoIP Server process. PCoIP server logs show a trace route log of up to 30 hops. …
Knowledge Base Article Troubleshooting Session Performance HP Anyware
Last modified: September 19, 2023
589