What does "IPC: Frame encode took xxx ms so far. Dropping down the quality to index x." in the log files indicate?
Answer: In this case, the imaging encoder has determined that too many bits were being sent in the upper portion of the frame (i.e. flooding) which causes the frame to take longer to encode, and therefore appears unresponsive to the user (> 750 ms to …
Configuring PCoIP Agents
After completing this unit, you’ll be able to: Understand the requirements for using configurations Understand the procedure to configure agent machine 40 mins PCoIP agents can be configured to optimize the PCoIP performance and behavior and these …
Is the current Texas Instruments USB to serial adapter in the Samsung NC241 compatible with View 5.0?
Answer: No, the current Texas Instruments USB to serial adapter built in to the Samsung NC241 is not compatible with View 5.0, or with the latest TI drivers. For View 5.0 an older legacy driver must be used. This driver must be obtained directly from …
Skipped compressing pkt due to PCM bit length in the PCoIP Remote Workstation Card Logs
Scenario User notices poor audio quality when connected to a PCoIP Remote Workstation Card (host card), and the following entries are in the PCoIP Remote Workstation Card's logs: 12/04/2013, 00:01:41> LVL:3 RC: 0 AUDIO_CMPRS :Skipped compressing pkt due …
Why do I see black bars on the side or bottom of my display when connecting to a zero client?
Scenario : When connecting a display (TV or monitor) to a PCoIP zero client you get solid black bars at the top and bottom or left and right sides of the display. It appears as if the image is being cut off. Resolution : This issue is caused by ' …
Do PCoIP Zero Clients and PCoIP Remote Workstation Cards support dynamic DNS?
Dynamic DNS allows for method of keeping a domain name record linked to a changing IP address. PCoIP Zero Clients and PCoIP Remote Workstation Cards do not currently support Dynamic DNS registration. They rely on the DHCP server to register the name when …