Teradici Documentation and Downloads | Documents and Downloads for Teradici products

Sort by

What does a NACK or NAK log entry indicate?

Negative Acknowledgement PCoIP imaging will acknowledge or use selective acknowledgement in newer PCoIP implementations, to signal to the PCoIP Host that imaging data was successfully received and displayed. In the event that this process is not …

How do I enable NTP on PCoIP Zero Clients and PCoIP Remote Workstation Cards?

Enabling NTP is important on the PCoIP Zero Client and PCoIP Remote Workstation Card. NTP is using for the following: Setting the time and date of the PCoIP Zero Client and PCoIP Remote Workstation Card. As there is no battery on the devices, the time and …

I can't see or access PC/workstation BIOS when using a PCoIP Remote Workstation Card?

Problem When remotely access my a workstation using the PCoIP Remote Workstation Card, the BIOS is not visible remotely and when it is, can't be controlled. Cause In order to access the BIOS when using a PCoIP Remote Workstation Card, the USB function …

Connection broker support with PCoIP technology

HP Anyware compatible brokers HP Anyware Manager Leostream Connection Broker ClearCube Sentral Connection Broker Virtual Cable UDS Enterprise (Universal Desktop Services) PCoIP Remote Workstation Card compatible brokers Compatible with PCoIP Zero Client …

How do I gather PCoIP client logs for the HP t410 (and change its logging verbosity)?

The HP t410 Smart Zero Client uses Teradici's PCoIP software. The PCoIP client logs are accessible on a HP t410 client through the on-screen-display. A bundle of log files can be saved to a local USB flash drive connected to the t410 client using the …

Knowledge Base Article Tutorial Setup Zero Clients

Last modified: July 27, 2023

1694

How to change the Num Lock setting on a PCoIP Zero Client

The num lock ( numlock) setting depends on whether the PCoIP Zero Client is at the On-Screen-Display (OSD) or when in-session. On-Screen-Display operation The "Factory" default setting of num lock can be set by the PCoIP Zero Client OEM during …

When installing the HP Anyware PCoIP Agent I get a Powershell execution policy error

Problem When installing HP Anyware PCoIP Agent for Windows you receive the error "The Powershell (x86) execution policy is currently set to Restricted. PCoIP Standard Agent requires the ability to run Powershell scripts; adjust the Powershell (x86) …

Workstation Remote Power Off

Remote power On Tera2 based PCoIP Zero Clients, the remote power off function can be access by pushing the power button briefly. This will bring up an on screen menu that can be cycled via the power button. The only power function available is Workstation …

How do I reset the configuration parameters entered on my PCoIP Zero Client or PCoIP Remote Workstation Card?

Answer: There are four ways to reset the PCoIP Zero Client to default settings which are described below. The PCoIP Remote Workstation card (also known as a PCoIP host card) has one reset procedure also described below. Some network information will be …

What is the impact of power outage during firmware update?

Firmware 5.0.0 and newer Due to additional functionality added to the PCoIP Zero Client over time, there is no longer space for two complete firmware images. To prevent the PCoIP Zero Client from entering an unrecoverable state from a power outage during …

Knowledge Base Article Advisory Setup Zero Clients

Last modified: November 16, 2022

1646

Filter by Products

Filter by Topics

Search Knowledge Center

Filter by Products

Filter by Topics