Displays
After completing this unit, you’ll be able to: Understand the different display configurations. Understand the supported resolutions 20 mins With PCoIP, you can configure several display settings as described below.   Display Resolutions PCoIP supports …
Knowledge Base Article Tutorial Display HP Anyware
Last modified: September 5, 2023
1182
What does the error message "Session Closed Remotely" mean?
There are a number or reasons that the message "Session Closed Remotely" appears during a brokered session listed below. Informational Messages Closed by login at an alternate location or host shutdown/restart User initiated logout Disconnected by …
Knowledge Base Article Advisory Session HP Anyware Remote Workstation Card Zero Clients
Last modified: December 9, 2022
1011
What is the impact of minimum and maximum initial image quality on a PCoIP Session?
Minimum and maximum initial image quality sets the lower and upper quality level. The default values in HP Anyware is Q40 for the minimum initial image quality and Q80 for the maximum initial image quality. If PCoIP estimates there is adequate bandwidth …
Knowledge Base Article Advisory Display Performance Remote Workstation Card HP Anyware
Last modified: July 31, 2023
625
Should I use an initial image quality of Q100?
An initial image quality of Q100 will deliver the highest quality of image PCoIP can deliver. Q100 is not lossless, for a lossless image, build to lossless must be enabled.  How to configure the Turn off Build-to-Lossless feature session variable in GPO …
Knowledge Base Article Advisory Display Performance Remote Workstation Card Zero Clients HP Anyware
Last modified: August 1, 2023
610
Configuring PCoIP Clients
After completing this unit, you’ll be able to: Understand the requirements for using configurations Understand the procedure to configure client machine 40 mins   Configuring Soft Clients PCoIP clients can be configured to allow you to set different user …
Knowledge Base Article Tutorial Setup HP Anyware
Last modified: September 3, 2023
435
PCoIP Configuration Guide
Helps you to understand the configurations that you can do on PCoIP Agents and Clients. ~65 mins This course will help you to understand the different configurations that can be done on the Agents and Client in order to optimize PCoIP performance. After …
Knowledge Base Article Courses Setup HP Anyware
Last modified: September 3, 2023
386
Configure HP Anyware Event Log Verbosity
HP Anyware event log verbosity (level) can be configured on both the client and agent software.   PCoIP Software Client for Windows: http://www.teradici.com/web-help/pcoip_client/windows/current/#Topics/Troubleshooting.htm?Highlight=Setting%20Log%20Levels …
Knowledge Base Article Tutorial Setup HP Anyware
Last modified: September 3, 2023
299
Why is the image quality reduced for a couple seconds right after a session is connected?
This is expected behaviour during the first couple seconds when a PCoIP session is established and is caused by the PCoIP device's bandwidth management algorithm. The algorithm continuously optimizes the amount of network traffic a PCoIP device generates …
Knowledge Base Article Troubleshooting Session Performance Remote Workstation Card Zero Clients HP Anyware
Last modified: August 7, 2023
199