How do I disable login username caching on a PCoIP Zero Client?
On a PCoIP Zero Client, username caching is set in the advanced options and can be disabled from the OSD Screen, the Administrative Web Interface (AWI), or the PCoIP Management Console.    From the OSD Screen: Under Options, select Configuration In the …
Knowledge Base Article Tutorial Setup Management Session Management Console Zero Clients
Last modified: September 3, 2023
593
Configures the PCoIP transport header
Configures the PCoIP transport header with the following options: When set to Enabled , the configured session priority of high , medium , or low is used. When set to Not Configured , then the default of medium session priority is used. When set to …
Knowledge Base Article Tutorial Session HP Anyware
Last modified: September 19, 2023
594
ICMP packets are being send from the machine at the start of the PCoIP session
Problem At the start of a PCoIP session a network trace or firewall logs are recording ICMP packet being sent from the machine. Further investigation shows they are from the PCoIP Server process. PCoIP server logs show a trace route log of up to 30 hops. …
Knowledge Base Article Troubleshooting Session Performance HP Anyware
Last modified: September 19, 2023
588
Sample CentOS 7.4 DHCP configuration file for PCoIP Management Console auto discovery
The purpose of this tutorial is to provide a sample DHCP configuration for auto discovery of the PCoIP Management Console 2.x and newer. In this set up the following were deployed: CentOS 7.4 VM hosted on ESXi 5.5 server. Configured the CentOS VM with two …
Knowledge Base Article Tutorial Management Management Console
Last modified: December 11, 2018
576
Why does my PCoIP Remote Workstation hibernate or sleep and not power off remotely from my Tera 2 PCoIP Zero Client?
When a PCoIP Zero Client attempts to power down a Windows 7 or Windows 10 workstation host during a PCoIP session, the workstation may enter the sleep state rather than being shutdown. This will occur if Windows is configured to map the PC power button to …
Knowledge Base Article Advisory Session Remote Workstation Card Zero Clients
Last modified: July 3, 2020
530
Can I manage PCoIP endpoints external to the corporate network with the PCoIP Management Console?
The PCoIP Management Console 1.x & 2.x cannot manage PCoIP devices that are external to the corporate network or behind a NAT over the WAN. But the PCoIP Management Console 1.x & 2.x can manage devices that are accessible over a routable network, so if …
Knowledge Base Article Tutorial Management Management Console
Last modified: September 19, 2023
496