Recommend upgrading LLS 21.03 or earlier to the latest LLS to avoid service disruption
Our third-party license provider is upgrading certificates in March 2023 If you are running a  supported  HP Anyware Local License Server (LLS) or using the Cloud License Service (CLS), you will not be impacted by these changes.  The new certificates are …
Knowledge Base Article Troubleshooting Licensing
Last modified: September 3, 2023
429
What types of USB devices are supported in Linux with the PCoIP Remote Workstation Card?
The Tera2 PCoIP Remote Workstation Card presents a Open Host Controller Interface (OHCI) and Enhanced Host Controller Interface (EHCI), supporting the USB 1.0 and USB 2.0 specifications respectively, via the PCIe 1x connector to the motherboard. If is up …
Knowledge Base Article Advisory Peripheral Devices Remote Workstation Card
Last modified: August 2, 2023
393
Should I configure "Maximum Initial Image Quality" to 100 if I want lossless still image?
No. Regardless of PCoIP image-quality settings, still images are always lossless. The time it takes to display them depends on your image-quality settings and available network bandwidth. For most situations, it is recommended to use 40 for Minimum Image …
Knowledge Base Article Advisory Performance Display Remote Workstation Card HP Anyware Zero Clients
Last modified: December 9, 2022
386
Why can I use my cell phone to transfer files when I have blocked all mass storage devices through the Unauthorized Devices table?
There are 3 ways to transfer data to USB devices. Mass storage devices (flash drives, DVD), all file types Photo Transfer Protocol - PTP - still image capture device class for cameras, (pictures). Media Transport Protocol - MTP - (smartphones), all file …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: November 17, 2022
383
Is the current Texas Instruments USB to serial adapter in the Samsung NC241 compatible with View 5.0?
Answer: No, the current Texas Instruments USB to serial adapter built in to the Samsung NC241 is not compatible with View 5.0, or with the latest TI drivers. For View 5.0 an older legacy driver must be used. This driver must be obtained directly from …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: August 1, 2018
362
Why do I see black bars on the side or bottom of my display when connecting to a zero client?
Scenario : When connecting a display (TV or monitor) to a PCoIP zero client you get solid black bars at the top and bottom or left and right sides of the display. It appears as if the image is being cut off. Resolution : This issue is caused by ' …
Knowledge Base Article Troubleshooting Display HP Anyware Remote Workstation Card Zero Clients
Last modified: July 15, 2023
339