Is it possible to configure the PCoIP Zero Client or PCoIP Remote Workstation Card device name via the hostname option on my DHCP server?
Answer: No you cannot name devices via DHCP, but you can pass your hostname from your PCoIP device to the DHCP server. PCoIP Zero Clients or PCoIP Remote Workstation Cards will pass DHCP options 12 (hostname) and option 15 (domain name) to the DHCP …
Knowledge Base Article Advisory Setup Remote Workstation Card Zero Clients
Last modified: September 8, 2023
525
PCoIP Host Driver Software 4.3.1 does not automatically map the PCoIP remote workstation cards in Leostream.
Answer : If you try to automatically map the PCoIP remote workstation card (host card) running PCoIP Host Driver Software 4.3.1 and using the Leostream broker it will fail. If you downgrade the PCoIP Host Driver Software to 4.2.2 it automatically maps. …
Knowledge Base Article Troubleshooting Third Party Enhancements Remote Workstation Card
Last modified: September 14, 2023
437
Can a WAN accelerator be used to improve the performance of PCoIP sessions?
PCoIP does not benefit from a WAN accelerator, legacy WAN accelerator solutions use different methods to improve the performance of applications operating over congested networks. These methods include compressing packets, implementing proxy servers that …
Knowledge Base Article Advisory Performance HP Anyware Remote Workstation Card
Last modified: December 14, 2022
434
Should I configure "Maximum Initial Image Quality" to 100 if I want lossless still image?
No. Regardless of PCoIP image-quality settings, still images are always lossless. The time it takes to display them depends on your image-quality settings and available network bandwidth. For most situations, it is recommended to use 40 for Minimum Image …
Knowledge Base Article Advisory Performance Display Remote Workstation Card HP Anyware Zero Clients
Last modified: December 9, 2022
381
What does "IPC: Frame encode took xxx ms so far. Dropping down the quality to index x." in the log files indicate?
Answer: In this case, the imaging encoder has determined that too many bits were being sent in the upper portion of the frame (i.e. flooding) which causes the frame to take longer to encode, and therefore appears unresponsive to the user (> 750 ms to …
Knowledge Base Article Troubleshooting Performance HP Anyware Zero Clients Remote Workstation Card
Last modified: December 9, 2022
379
Requirements for the Leostream broker to automatically detect a PCoIP Remote Workstation Card?
Requirements For the Leostream broker to automatically detect a Remote Workstation Card the following components must be installed: PCoIP Remote Workstation Card inserted in the host PC Leostream Connection Broker 7.7 or newer Leostream Agent 5.5.95 or …
Knowledge Base Article Tutorial Third Party Enhancements Remote Workstation Card HP Anyware
Last modified: September 19, 2023
365
Skipped compressing pkt due to PCM bit length in the PCoIP Remote Workstation Card Logs
Scenario User notices poor audio quality when connected to a PCoIP Remote Workstation Card (host card), and the following entries are in the PCoIP Remote Workstation Card's logs: 12/04/2013, 00:01:41> LVL:3 RC: 0 AUDIO_CMPRS :Skipped compressing pkt due …
Knowledge Base Article Troubleshooting Performance Remote Workstation Card Zero Clients
Last modified: August 3, 2023
356
Do PCoIP Zero Clients and PCoIP Remote Workstation Cards support dynamic DNS?
Dynamic DNS allows for method of keeping a domain name record linked to a changing IP address. PCoIP Zero Clients and PCoIP Remote Workstation Cards do not currently support Dynamic DNS registration. They rely on the DHCP server to register the name when …
Knowledge Base Article Advisory Setup Remote Workstation Card Zero Clients
Last modified: September 7, 2023
332