Teradici Documentation and Downloads | Documents and Downloads for Teradici products

Sort by

How can I tell which monitors are connected and if a USB device is connected locally or bridged on a PCoIP Zero Client?

Answer: From your Web browser, enter the IP address of your PCoIP Zero Client. Log in to the user interface with your user credentials. (Note: Depending on your specific setup, a password may not be required.) From the Info menu, select Attached Devices . …

Why do certain large screen (>27" monitors) dual-link DVI monitors not work with the TERA 2 PCoIP Zero Clients?

Scenario When some monitors supporting 2560 x 1600 and 2560 x 1440 resolutions are power cycled with the power switch, the video may not appear when connected to a Tera2 Zero Client via dual-link DVI. This applies to: Tera2 Zero Clients running firmware …

Problem with Smartcard Authentication when ActiveIdentity middleware is used.

Currently there is a reported issue where smartcard authentication does not work with the latest ActivIdentity middleware version 7.0.2.318, while used with Tera1 and Tera2 PCoIP Zero Clients. Users are advised to roll back to an earlier version of …

Can I add software to or change the operating system of a PCoIP Zero Client?

PCoIP Zero Clients do not run local application software. They run secure custom firmware created by HP Anyware only. This makes them extremely secure PCoIP Clients allowing for simple management and updates through small firmware updates. New features …

Knowledge Base Article Tutorial Setup Zero Clients

Last modified: September 22, 2023

249

Unable to start docker containers connector_cm and connector_connectorgateway during HP Anyware Connector installation

In Ubuntu 18.04.4 LTS or Ubuntu 18.04.5 LTS setting up HP Anyware Connector, if IPV6 was disabled in the vm those 2 containers will always fail to start. During the installation or reinstallation of the HP Anyware Connector, connector_cm and …

Does the TERA2321 support the SGMII interface for a copper SFP?

Answer: No. The Tera2321 only supports MII (10/100Mbps) or RGMII (10/100/1000Mbps) copper/fiber interfaces. Definitions : SGMII - Serial Gigabit Media Independent Interface. RGMII - Reduced Gigabit Media Independent Interface. MII - Media Independent …

Does the PCoIP Management Console 2.x and 3.x ship with a default certificate?

Yes. The PCoIP Management Console since release 2.x ships with a HP Anyware self-signed certificate to allow the PCoIP Management Console to function out of the box. It is recommended that all users deploying the PCoIP Management Console 2.x or …

Issues when using PCoIP Zero Clients and Imprivata 4.7.x

If you are experiencing an issue with a proximity card reader being reset randomly, ensure you have the latest version of Imprivata Onesign server and the latest PCoIP firmware uploaded on your PCoIP Zero Client. Reports of older firmware running on …

Does PCoIP support DDC/CI to remotely controlled display settings?

To remotely control display settings using DDC/CI, you need: PCoIP Zero Client with firmware 2.3 or newer Monitor that supports DDC/CI that is connected to the PCoIP Zero Client. The DDC/CI protocol is vendor specific. To date, the NEC version of the …

Local Administrative Password setting is disabled after changing the firmware version in the profile in the PCoIP Management Console 3.0.0

Problem After changing the firmware version in a profile in PCoIP Management Console 3.0.0 the Local Administrative Password setting is no longer enabled and the password field is blank. Cause This issue is known to happen when the following conditions …

Filter by Products

Filter by Topics

Search Knowledge Center

Filter by Products

Filter by Topics