How to remove expired license from MC 2.x or 3.x to switch from Enterprise Edition to Standard Edition?
NOTE: If you are running Management Console 2.x or 3.x in Enterprise Edition and your license has expired you will not be able to log into the Management Console until you have either deactivated all your expired licenses or have activated new licenses. …
Knowledge Base Article Tutorial Licensing Setup Management Console
Last modified: September 3, 2023
728
Upgrading from firmware 3.4.x or earlier, a message displays indicating my USB devices failed authorization
Problem When upgrading PCoIP Zero Client firmware from 3.4.x, USB locally terminated devices work, but no redirected (bridged) USB devices work. When viewing attached devices in the Administrator Web Interface (AWI) only the mouse and keyboard show as …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: September 25, 2023
686
Installing Management Console
After completing this unit, you’ll be able to: Install the HP Anyware Management Console, or Migrate to a newer version 25 mins   HP Anyware Management Console is released in three formats that feature CentOS as the PCoIP Management Console installation …
Knowledge Base Article Tutorial Management Setup Management Console
Last modified: August 2, 2023
668
Why do USB 2.0 or isochronous devices fail to work as expected when plugged into a Samsung NC220 or NC240 PCoIP monitor?
Answer: This occurs because on the NC220 and NC240 monitor series, USB Ports 0, 1 and 2 are brought out directly and port 3 is connected to an internal hub. On this hub, 1 hub port is connected to a RS232 device, and another hub port is connected to an …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: November 21, 2022
635
How do I disable login username caching on a PCoIP Zero Client?
On a PCoIP Zero Client, username caching is set in the advanced options and can be disabled from the OSD Screen, the Administrative Web Interface (AWI), or the PCoIP Management Console.    From the OSD Screen: Under Options, select Configuration In the …
Knowledge Base Article Tutorial Setup Management Session Management Console Zero Clients
Last modified: September 3, 2023
593
How to configure a PCoIP Zero Client to auto-connect to a Remote Workstation Card
Answer: To enable auto connect, you need to peer the PCoIP Zero Client to the Remote Workstation Card. You will need the IP and MAC of the host. You enter this in the PCoIP Zero Client's configuration (On Screen Display or Administrative Web Interface), …
Knowledge Base Article Tutorial Setup Remote Workstation Card Zero Clients
Last modified: September 14, 2023
576
How do I restrict a USB device in PCoIP Zero Client where a Hub is used?
Scenario Introduced in Firmware 4.1 is a new feature that allows a keyboard and mouse to be locally terminated behind a hub on a PCoIP Zero Client. Previously all devices on a HUB were treated as one and the keyboard and mouse were remotely terminated. …
Knowledge Base Article Tutorial Peripheral Devices Zero Clients
Last modified: November 18, 2022
555